#Vampire savior 2 rooster how to#
#Vampire savior 2 rooster cracked#

Two things I learned quickly about working with bondo (my first time doing ANY of this stuff) are 1. Lastly, I picked up a can of bondo body filler and a tube of the hardener and started filling in the damaged areas on the side, front and edges of the cab. Seems to be holding well enough and hopefully when sanded and painted you won't be able to tell.

#Vampire savior 2 rooster cracked#

I've been unsuccessful in finding an original example or reproduction of the Vampire Savior 2 (or even the original vampire savior) CPO, so for now I think I'm just going to stick with the black & gray.ДЇor the split MDF on the kick panel, I found some tutorials online and ended up separating the cracked area with a paint scraper and then dripping a shitton of wood glue in there. I tried using goof-off to get the rest of the glue, but I ended up just hitting the whole thing with an orbital sander at 60 grit and now the whole thing is smooth and ready for a coat of primer.

I've settled on something like this for now, but I've had a really hard time finding 3/4' t-molding in that smoke gray color.ДЇor the control panel, I got some advice from a friend and picked up a cheap heat gun and a paint scraper at harbor freight and was able to peel off the existing SF2 CPO with only a small layer of glue left over. I found a pre-made 3d model of my z-back cabinet and so I decided to try out some color schemes. Question: What kind of wood should I get to replace this panel with?ДЄ few small updates. Question: If I was to replace this, how can I get this one piece out without damaging the rest of the cabinet? Should I cut it out with a saw? I have 0 woodworking experience, but replacing this one panel seems reasonably easy I removed the coin door and took some pictures: The next thing I noticed was the wood of the kick panel / coin door area of the cabinet is split at the top and probably should be replaced. Question: Are there vendors that sell adhesive CP artwork in the shape of my CP that I can just replace it with?

#Vampire savior 2 rooster how to#

Question: Any suggestions on how to get the existing artwork off? Should I just sand it? The control panel itself is metal and it looks like the existing artwork is on stuck on there like a huge sticker. The cabinet has one of those fold down control panels with and a removable drawer that holds the PCB that slides out with it, so I decided to unplug everything, slide it out and see what the condition was.ДЇrom what I can tell, I've already got the JAMMA harness for the CP but I'll be needing a whole bunch of replacement switches, some new disconnects, and I'd like to get some new artwork (or at least something better than the ripped SF2 layout). I have a Vampire Savior 2 CPS2 B board (and an A board) on their way to me right now, so now I just need to get the cab ready.

I've decided to start simple and just convert my emtpy dynamo z-back cabinet into a dedicated fighter cabinet since it already has a CP setup for street fighter. If you have any suggestions or advice for my questions below please let me know) (I originally posted these questions on the BYOAC forum, but someone recommended I try to solicit some advice here instead.